Snapmaker Ray 20W & 40W Laser Engraver and Cutter Series - With Air Assist
Smart Investment, Elegance with Class 1 Safety
Snapmaker Ray is a 20W & 40W air-assisted laser engraver and cutter with a 400mm × 600mm working area. It incorporates Snapmaker's signature industrial grade linear rails and offers Class 1 laser safety.
Click Here to See 👉 Snapmaker Ray Unboxing Article
Key Features:
• 20W & 40 W Diode Laser
• Industrial-grade Linear Rails
• Smart Air Assist
• 500mm/s Max. Work Speed
• 400 x 600mm Work Area
• Laser Class 1 Safety Certified by FDA
• 1000+ Laser Vectors in Luban
• Easy Focus with Focus Lever
• Orientation Detection
• Overheat Protection
Cutting-edge Laser Beam Combining Technology
40W Laser Module delivers superb performance with the most cutting-edge laser beam splitter and beam shaping optics.
Comparison of 20W and 40W Laser Module
Basswood Plywood
Material: Basswood Plywood Material: Basswood Plywood
20W Thickness: 10mm (one pass) 40W Thickness: 15mm (one pass)
Laser Module Speed: 3mm/s Laser Module Speed: 3mm/s
Power: 100% Power: 100%
Initial Cutting Height Offset: 3mm Initial Cutting Height Offset: 3mm
Pinewood
Material: Pinewood Material: Pinewood
20W Thickness: 15mm (one pass) 40W Thickness: 20mm (one pass)
Laser Module Speed: 2mm/s Laser Module Speed: 2mm/s
Power: 100% Power: 100%
Initial Cutting Height Offset: 4mm Initial Cutting Height Offset: 4mm
*Video of comparison is 8x faster.
Strong Cutting Capabilities
Empowered by 40W output power.
Achieve Cleaner Cuts with Air Assist
1. Air gets pumped in.
2. Blow the fumes away and prevent charring.
3. Keep the laser lens clean
4. Fumes get channeled out through grid table.
400mm x 600mm Work Area
You can produce large projects such as maps, furniture models and doorplates. Ray can be raised with a cylindrical base, allowing you to work with a laser job up to 160mm thick.
Industrial-grade Linear Rails
Support work speed up to 500mm/s and long-lasting operation.
500mm/s Max. Speed
Compatible with LightBurn
Support features like serial connection, movement control, and G-code generation. Access full sets of recommended parameters for common laser materials in LightBurn.
1000+ Laser Vectors in Luban
Luban provides an extensive library of preset templates, including common patterns, shapes, and icons, for you to come up with a design in minutes.
Laser Class 1 Safety Certified by FDA
The Enclosure panels made with brown acrylic are specially designed to shield you from the laser hazards. The embedded door-detection sensor lets Ray automatically stop the laser job when the door is opened.
Dust Isolation
Turn on the exhaust fan to cast off all the smoke and dust. You can further connect it with our Air Purifier to filter harmful chemicals.
Laser Focusing Made Easy with Quick Swap
In just three steps, you can easily finish the calibration.
Rotary Engraving
The upcoming Rotary Module can work on more daily life objects in the shape of ring, cone, sphere, or cylinder, etc.
Snapmaker Ray 40W Cutting Test