100% Smoother Guide Rail
Patent guide rail developed by Thunder Laser, less resistance and low noise, that's the most important factor why Bolt Pro series could reach 2000mm/s speed.
1,000 DPI RF Metal Laser Source
The RF Metal Lasers are designed to operate without high voltage or water cooling and for durability. This makes RF metal lasers inherently safer to operate in almost any environment. Also, with the excellent quality Beam output and stable laser power, lifespan up to 10,000 hours !
Upper & Lower Vent
Bolt Pro 22 has Upper and Lower exhaust ventilations design to timely remove the heat and smoke from material surface while engraving.
Dual Air-Assist System + Air Pressure Diaplay
Precise control of your air assist for cutting and engraving. High and low air pressure for cleaner results.
Controlled by the Smart Board, there are 2 modes for the air assist function of the Thunder Laser machine. Usually Thunder set low volume air for engraving and high volume air for cutting on the design drawing layer on laser software. This way they can get cleaner results on both engraving and cutting process. This also works in Lightburn software. For cutting we simply switch air assist on, for engraving we switch air assist off and this activates the low air stage.
Air assist is an important feature to reduce the risk of materials catching fire when heated by the laser. Air assist also protects the lens from the smoke and dust generated during laser processing of materials. Neither the low volume air nor the high volume air is activated until the laser starts. This proprietary dual air function also helps to save energy and reduce noise.
Eightfold Open-flap Protection
8 x Open-cover protection sensor switches were installed on four covers. For each cover is standard for CE certification and FDA requirements, it ensures that the entire machine is safe enough for the operator. If one of the sensors should fail, the protection would still work. Also, the laser will stop if someone open any machine cover during working.
To facilitate machine maintenance, Thunder's engineers have developed a patented circuit board that detects the working status of these sensors. There is a button to switch to maintenance mode for laser beam alignment.
Create more possibilities
Thunder Laser can help you stretch your imagination. We are constantly innovating our Odin laser engraver. Adjustable laser power and the proprietary dual air assist system play an important role. They open the door to design customisation.
It creates different layers on the material, resulting in more intricate designs!
Key Features
．Newly-designed focus lens and mirror holder
Easier to clean and replace lens and mirrors, Lenses of different FL are swappable in the same mount.
．Newly upgraded exterior design
Used for the support between the blower and compressor, so that the whole more space saving.
．New Auto focus
No limitation for materials or working area, more accurate.
．Drawer for collecting small working pieces
To make it easier to collecting small working pieces and cleaning up.
．Smart board
Control the exhaust fan, air assist and alarm lamp automaticly, energy saving.
．Visible Red Dot Pointer
Make the laser beam“visible”.
．Honeycomb table
Reduces underside reflections.
．High quality power cable
The high-quality electrical connector has low and stable contact resistance.
．Heat alarm detector
．Emergency stop
Turn off the machine immediately when there is an accident.
．Alarm Lamp
Show the work state and tell when the job is done, more safe for you.
．Breaker
This is a protective conductor, included to prevent shock and/or fire.
．Earth wiring
Earthing is used to protect you from an electric shock.
．3D Engrave
Engrave high quality 3D photos directly.
．Air assist
Blowing air to prevent the material being burned.
．Rotary plug
Work on round items such as tumbler,mug and bamboo pipe by laser engraver.
Compatible Materials of laser engraving machines