ColorFabb PLA-HP Silver Series
If you are looking for excellent high temperature resistance, 134C HDT, with the easy to print properties of PLA, Colorfabb PLA-HT 3D printing cables will fit your needs!
No more annealing, the desired temperature resistance is achieved right after printing. For example, it is now possible to wash printed samples in the dishwasher or leave them in the car on hot summer days. In general, Colorfabb PLA-HP retains its functionality even under high temperature conditions. The resin formulation is 100% bio-based.
Key Features:
．Excellent heat resistance - up to 134C HDT (injection moulded samples)
．Easy to print, similar to PLA
．High tensile strength - 3766 MPa
Disadvantages
．Higher temperature resistance, resulting in more warpage.
．Slightly lower impact resistance than standard PLA.
| Diameter (Tolerance) |
± 0.1mm |
| Density |
1.430 g·cm-3 |
| HDT (Heat Deformation Temperature) |
Max. 134°C HDT (injection moulding sample) |
| Recommened 3D Printing Temperature |
200-220℃ |
| Recommened 3D Printing Speed |
40 - 100 mm/s |
| Suggested Hot Bead Temperature |
50℃ (Non-mandatory requirements) |