Online shopping

Spare Sheet for High Temperature Plate(Smooth PEI)
Product model BL0021
Brand Bambu Lab
Price 139 

Quantity

Bambu Lab Spare Sheet for High Temperature Plate(Smooth PEI) - for X1, P1

Overview

The Bambu High-Temperature Sheet (Smooth PEI) is a sheet with an adhesive side for replacing the sheet on your High-Temperature Plate.

Compatibility

X1 Series and P1 Series

Recommended settings for Bambu High-Temperature Plate

Please note that other slicer settings might need to be adjusted based on the printed model and the filament requirements.

 
Materials Hotbed Temperature Glue Stick Required? Upper Glass Cover Plate Removed?
PLA/PLA-CF/PLA-GF 45~60℃ Recommended Yes
ABS 90~100℃ Recommended No
PETG 80℃ Yes Yes
TPU 35℃ Recommended Yes
ASA 90~100℃ Recommended No
PVA 45~60℃ Recommended Yes
PC/PC-CF 100~110℃ Yes No
PA/PAHT-CF 100~110℃ Yes No

Precautions
The Bambu High-Temperature sheet is easy to replace and install.

▪️ After tearing off the original sheet, please use alcohol to wipe the surface clean. Make sure the surface stays dry while applying a new sheet.

▪️ You can use an anhydrous ethanol solution or isopropanol solution with a concentration of over 90% to wipe the plate. You can also use detergent and water to clean the surface.
 
▪️ You can also use detergent and water to clean the surface.

It is also best to use special solid glue (Glue Stick for Build Plate) before printing to avoid damage during model removal.

Materials

Hotbed Temperature

Glue Stick Required?

 Upper Glass Cover Plate Removed?

PLA/PLA-CF/PLA-GF

45~60℃

Recommended

Yes

ABS

90~100℃

Recommended

No

PETG

70℃

Yes

Yes

TPU

35℃

Recommended

Yes

ASA

90~100℃

Recommended

No

PVA

45~60℃

Recommended

Yes

PC/PC-CF

100~110℃

Yes

No

PA/PA-CF/PAHT-CF

100~110℃

Yes

No

side2_mod_top side2_mod_bottom
Back to Top