【3D Printing Test】Ultimaker 3D Printing Toolbox: Material and Time Video Showcase!
Industrial parts, all in one place! The Ultimaker 3D printing toolbox, 3D printing filaments, printing process, and complete production time introduction, with a full overview of all functions. Let's unbox it together and see what's inside:
The equipment and outer box of the Ultimaker full series toolbox are all produced using an Ultimaker 3D printer. In the video, you can see the items being successively placed into the toolbox, using materials from common ones like PLA, ABS, and TPU, to CPE, PP, and PETG. They are clearly listed for you, and a summary of all materials is attached at the end of the article:
1. Bellow
The bellow, made from Ultimaker TPU 95A, has a smooth surface and excellent elasticity, allowing it to be twisted and pressed freely. It offers high elasticity and quality. (See the effect at 01:29 in the video.)
．3D Printing Time: 1 hour 4 minutes
．3D Printing Filament: Ultimaker TPU 95A
．Weight: Approximately 17g
2. Flat Fan Nozzle
The flat fan nozzle, made from Ultimaker PP, has a translucent appearance and a detachable spiral base. (See the effect at 01:36 in the video.)
．3D Printing Time: 5 hours 48 minutes
．3D Printing Filament: Ultimaker PP
．Weight: Approximately 23g
3. Vacuum Gripper
The vacuum gripper, made from Ultimaker PETG/ Ultimaker TPU 95A, features a gray structure on top made of PETG and a spiral base below made of TPU 95A, allowing for self-assembly and disassembly. (See the effect at 01:43 in the video.)
．3D Printing Time: 3 hours 28 minutes
．3D Printing Filament: Ultimaker PETG/ Ultimaker TPU 95A
．Weight: Approximately 24g
4. Robot Gripper
The 3D printed robot gripper is made using three different materials: Ultimaker Nylon/ Ultimaker TPU 95A/ Ultimaker PC. The translucent detachable structure at the bottom is made of Nylon, while the main structure is dual-extruded using an Ultimaker dual nozzle with Ultimaker TPU 95A and Ultimaker PC. (See the effect at 01:50 in the video.)
．3D Printing Time: 4 hours 23 minutes
．3D Printing Filament: Ultimaker Nylon/ Ultimaker TPU 95A/ Ultimaker PC
．Weight: Approximately 30.4g
5. Masking Plug
The industrial threaded plug is made from white Ultimaker TPU 95A, featuring elasticity and a smooth, delicate surface. (See the effect at 01:58 in the video)
．3D Printing Time: 50 minutes
．3D Printing Filament: Ultimaker TPU 95A
．Weight: Approximately 18.5g
6. Industrial Parts (Breakaway Support)
Industrial parts are made using red Ultimaker Tough PLA filament, with Ultimaker Breakaway support filament assisting with overhanging sections. After printing, the supports can be easily removed, preserving the complete sample. (See the effect at 02:04 in the video.)
．3D Printing Time: 1 hour 45 minutes
．3D Printing Filament: Ultimaker Tough PLA/ Ultimaker Breakaway
．Weight: Approximately 5.8g
7. Conveyor Comb
The blue conveyor comb is printed using Ultimaker CPE. Both the comb-like structure at the bottom and the Ultimaker Logo on the surface exhibit excellent precision. (See the effect at 02:11 in the video)
．3D Printing Time: 2 hours 44 minutes
．3D Printing Filament: Ultimaker CPE
．Weight: Approximately 26g
The blue conveyor comb is printed using Ultimaker CPE. Both the comb-like structure at the bottom and the Ultimaker Logo on the surface exhibit excellent precision. (See the effect at 02:11 in the video)
．3D Printing Time: 2 hours 44 minutes
．3D Printing Filament: Ultimaker CPE
．Weight: Approximately 26g
8. COTS Parts (Screws)
The screw COTS parts, made from Ultimaker ABS, demonstrate high precision, allowing screws to be accurately placed within the parts. (See the effect at 02:16 in the video.)
．3D Printing Time: 1 hour 59 minutes
．3D Printing Filament: Ultimaker ABS
．Weight: Approximately 5.8g
9. Ultimaker Case
The final toolbox, designed to store all the parts, uses blue Ultimaker PLA for the upper and lower halves, and Ultimaker TPU 95A for the flexible middle connection. This design allows for flexible opening and closing, and the front clasp ensures secure closure, keeping all tools neatly stored. (See the effect at 02:22 in the video)
．3D Printing Time: 19 hours 19 minutes
．3D Printing Filament: Ultimaker PLA/ Ultimaker TPU 95A
．Weight: Approximately 778g
Ultimaker Full Series Parts Toolbox - Overview of 3D Printing Filaments Used
Ultimaker industrial-grade 3D printers feature a dual extrusion system, enabling stable printing of various sized parts. 3DMart offers more than just 3D printing; contact us now to learn more about Ultimaker 3D printers.
Follow our Facebook page to stay updated: https://www.facebook.com/3dmart.com.tw/
https://www.instagram.com/3dmart