[Metal Marking] Wisely Three-Color Logo Engraving: Software Parameter – 3DMART HK

【Metal Marking】Wisely Three-Color LOGO Engraving: Software Parameter Video Tutorial!

Stainless steel, aluminum, brass, galvanized steel - multi-color LOGO metal marking, engrave all kinds of metals! With the Wisely MOPA Fiber Laser Engraver, you can engrave multiple colors at once. Parameter settings are revealed at the end of the article:

1. Focus Calibration

Activate the "lens specification" on the side of the marking machine according to the lens specification being used (the lens specification used in this test was 150 x 150mm). Then, use the included focusing ruler to measure the distance to the baseline by vertically holding the ruler above the object. Rotate the upper knob until the ruler reaches the specified position.

The finger icon indicates the "focus distance baseline". Vertically align the ruler with the engraving object, measure upwards to the baseline, and adjust to the specified distance to complete focusing.

2. Software Parameter Settings

Import the object file to be laser marked, and edit/modify the ruler position and set data as required.

1. Import engraving file

2. Click "Fill Path Tool"

3. Select marking path type

4. Set path fill spacing

According to the material of the marking object, click on the layer or directly click on the object, select the engraving graphic, and set the parameters (speed / power / pulse / frequency). (Note: The object color in the image below is only the "layer color")

To avoid confusion during setup, you can set the "layer color" to the "expected marking color". Finally, select all objects in the layer and prepare for marking. (Note: The object color in the image below is only the "layer color", the actual marking color depends on the parameter settings)