【3D Scanning Tutorial】REVOPOINT 3D Scanner: Automatic Exposure, Fast and Detailed!
Full tutorial for the REVOPOINT POP 2 3D Scanner: software operation, actual scanning results. With a fixed tripod, dedicated turntable, and handheld mobile phone mode, you're not limited by cable length and can perform 3D scanning anytime, anywhere. Watch the unboxing and tutorial now:
I. Unboxing Contents
2. Tripod
3. Dedicated scanning turntable
4. Phone holder
5. Power bank
6. Sample scan model – David bust
7. Connecting cables
II. Tripod-mounted 3D Scanning
Accessories: Tripod / Scanner / Turntable / Computer software
Use the tripod to fix the scanner and the turntable for 3D scanning. Before starting the scan, the system will automatically detect in real-time and prompt the optimal placement for the object.
1. Click "Auto Exposure" for fast and accurate 3D scanning.
2. Click "New Scan" to set scanning preferences based on accuracy and object type.
Scanning Accuracy: Fast Mode / High Precision
Scanning Mode: Feature Alignment / Marker Alignment / Deep Black Objects / Face / Head and Hair / Body
Texture Mapping: White Model / Color Model
Set the countdown seconds, then start scanning. During the scan, "green" in the software indicates successful imaging (David model size 5 x 5 x 9 cm). After completing the scan, click "End" to stop the scanning action.
During the process, you can adjust the object's placement angle as needed. Repeat the scanning process following the steps above to capture more comprehensive details. After completion, click on "Structural Parameters" and check "Fill Holes". The software will automatically fill holes in the model (total 3D scanning time: 5 minutes); click "Color Preview" to instantly switch to the object's original color. After the 3D scan is complete, the file can be directly imported into Ultimaker Cura slicing software for direct 3D printing. (Or perform other post-processing as needed)
III. Handheld / Mobile Phone-assisted 3D Scanning
Accessories: Scanner / Power bank handle / Holder / Mobile phone software
Assembling the Handheld 3D Scanning Grip
1. Assemble the phone holder onto the power bank handle.
2. Mount the 3D scanner onto the holder (or directly fix the scanner to a tripod).
3. Insert the two-in-one data cable into the back of the scanner and tighten.
4. Plug the USB connector into the output port (Out Put).
When using the handheld scanning mode, you can preview the results in real-time with your phone. The power bank handle below can directly connect to the 3D scanner and phone, so you're not limited by cable length and can perform 3D scanning anytime, anywhere. (Iron Man scan total time: 10 minutes)
Follow our fan page to stay updated: https://www.facebook.com/3dmart.com.tw/