【Unboxing and Review】Flashforge Resin 3D Printer, Four Times Larger Object Size!
Same desktop size, but 4 times larger print volume? Meeting the demand for large-sized objects or producing a large quantity of small parts, the "Flashforge Foto 13.3-inch LCD Resin 3D Printer" is the latest to arrive! With a print volume of up to 292 x 165 x 400mm, let us guide you through the unboxing and show you the actual test results immediately:
Using a 3D printer for developing samples and batch printing emphasizes efficiency! The common goal is to print the most objects in the shortest amount of time. The Flashforge Foto 13.3 has a total build volume of 19 liters, which is 4 times larger than a typical resin 3D printer. In addition to printing larger objects, it can also efficiently batch produce jewelry, replacement parts, assembly models, and more.
First, unbox the Flashforge Foto 13.3 Resin 3D Printer. Open the side-swing doors to fully reveal the enclosed space inside the machine. Then, loosen the fixed shaft above the print platform and remove the central foam block. You will find a complete toolkit and resin materials included.
Box contents include:
．1 can of Flashforge resin
．Power cable
．User manual
．Metal/plastic scraper
．Brush
．Gloves
．USB drive
．Wrench
．Tweezers
．Pliers
．Filter paper
．3 Calibration Steps
When first unboxing the device, "calibration" is performed before use to ensure stable and accurate operation. The calibration procedure for a resin 3D printer primarily involves Z-axis calibration before printing to align the 3D print platform with the LCD panel system:
1. Loosen the fixing screws
1. Loosen the fixing screws
Remove the resin vat, and loosen the fixing screws of the print platform (the platform does not need to be removed).
2. Place paper, start with one click
Place 3 sheets of A4 paper on the LCD panel. Click "Tool" > "Z-axis movement" on the touchscreen, then select "Reset". The print platform will automatically lower until it is flush with the bottom LCD panel. During this process, the touchscreen will display the distance between the platform and the bottom panel in real-time. When the distance on the screen shows "Z: 0.00mm", it means the platform has fully descended to the very bottom.
3. Tighten screws, raise platform
After the platform is completely flush with the paper and LCD panel, re-tighten the fixing screws of the platform. Pull the three sheets of paper back and forth until they can be pulled out with some resistance. Finally, click "Max" on the screen, and the platform will rise to the top again, completing the Z-axis calibration.
(After confirming the above 3 steps and checking if the bottom LCD curing light is on, finally lock the resin vat to start printing.)
Next, shake the photosensitive resin and pour it into the resin vat. The resin level should be based on the marking line inside the vat. Finally, close the shading door of the 3D printer.
．Start 3D Printing
1. Upload print file
On the touchscreen, select "Print". You can choose a system-preset model or upload a 3D model file using a USB drive.
On the touchscreen, select "Print". You can choose a system-preset model or upload a 3D model file using a USB drive.
2. Click Start
When you select the model to be printed, the screen will automatically display the model's appearance, estimated 3D printing time, layer thickness, and the name of the resin used. Once confirmed, you can start.
After resin 3D printing is complete, the model surface will be covered with liquid resin. Immerse the object in alcohol to clean off residual resin, then use a UV post-curing light to quickly cure the model. (Click here to see: Phrozen Mighty Resin 3D Printing Full Tutorial: Even articulated figures can be printed!)
We printed a 3D dragon with dimensions of up to 13 x 13 x 15.5cm. The fine granules on its chest, the skin wrinkles on its wings, and the facial contours are all highly complete and detailed. The Titan monsters that Godzilla hasn't battled yet can be created by you! Did you enjoy this sharing? The desktop equipment size and super large print volume meet all your object size needs. 3DMART provides more than just 3D printing. Contact us now to learn more about the Flashforge Foto 13.3-inch Resin 3D Printer.
Follow our fan page to stay updated: https://www.facebook.com/3dmart.com.tw/