![[3D列印配件] BuildTak 3D列印平台貼紙](http://3dmart.com.hk/cdn/shop/articles/201603241826560.jpg?v=1779423740&width=1600)
BuildTak 3D Printing Platform Sticker
Are you still worried about warping? Or what if your 3D printer doesn't have a heated bed? Don't worry, because the world-renowned powerful 3D printing platform sticker is now available~!
Features:
1. This printing platform sticker is specially designed for FFF (Fused Filament Fabrication) 3D printers, allowing objects printed with ABS, PLA, HIPS, Co-Polyesters, stone-fill, wood-fill & flexible (TPE) 3D printing filaments to adhere to it without easily warping; a thin layer of glue stick can also be applied for Nylon and t-glase (PETT) filaments to adhere to it.
2. Easier to apply and less prone to bubbles than regular blue painter's tape.
3. Protects the printing platform.
4. Heat-resistant and durable, can be reused repeatedly, and does not need to be changed with printing materials.
5. Creates optimal adhesion between the platform and the printed object during printing, yet does not easily attract dust, and printed objects are easy to remove.
3DMart offers three sizes of stickers for you to choose from!
165mm x 165mm
Diameter 165mm
203mm x203mm
Plus, there's a simple and clear installation guide, so you can get it done in three minutes!
Five steps for installation, fast and convenient:
Step 1: Check if the print platform is clean and free of debris; you can wipe it with 70% alcohol beforehand.
Step 2: Peel off the white adhesive backing from the Build Tak.
Step 3: Align the Build Tak with the edge of the print platform and apply it.
Step 4: Apply the remaining portion of the sticker, using a hard card like a credit card to help smooth it out and remove air bubbles.
Step 5: Re-calibrate the platform level.
BuildTak 3D Printing Platform Sticker - an absolute must-have for 3D printers lacking a heated bed, and even better for machines that have one!