Phrozen BASF Protowhite Rigid 3D Printing Resin
Backed by one of the world's most respected chemical companies, BASF Forward AM, Phrozen Protowhite Rigid 3D Printing Resin enables designers to efficiently prototype in-house before moving to the production stage.
![Prorowhite](https://3dmart.com.hk/en/upload/2022Phrozen/Resin/Prorowhite/DSC8294_1400x.png)
Key Features :
• Rigid resin from BASF Forward AM: Phrozen Protowhite Rigid 3D Printing Resin enables industrial designers to solve design challenges and increase efficiency during the design validation phase by creating rigid and impact-resistant 3D models.
• Easily visualise your design ideas: Turn conceptual ideas into complex 3D models to showcase low-volume, high-quality prototypes for more efficient communication.
• Ideal for prototype development: Experiment and compare different 3D printed prototypes such as mechanical parts, jigs, fixtures and eyewear to refine design usability.
• Save time with rapid prototyping: Demonstrate 3D models and gather peer feedback to identify improvements and reduce the risk of design errors before moving to full production.
3D Printing Samples
Precautions:
• Way to Rinse: Clean with alcohol spray with an air gun. DO NOT immerse the model into alcohol for a long time.
• Use and preserve resins in room temperature, and in dark and ventilated conditions
• Shake well before each use
• After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
• Keep resin away from kids and away from direct sunlight exposure
• Wear gloves and masks during the operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
• DO NOT dump resin. Please cure it and treat it as general plastic garbage.
• After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year.
• Post-processing note: For best results, please allow your print to dry for 40 to 60 minutes after wash, then postcure on both sides, 30 minutes per side.
• Minor color differences between the printed parts and website pictures do not impact the final performances.
Contact us to get more information about Phrozen 3D Printer and Resins!
Density |
1.1 g / cm3 |
Viscosity |
220 cP |
Density |
1.10 g/cm3 |
Surface Hardness |
77 Shore D |
Tensile Modulus |
2300 MPa |
Tensile Stress at Break |
57 MPa |
Elongation at Break |
15 % |
Flexural Modulus |
1920 MPa |
Flexural Strength |
94 MPa |
Notched Izod Impact Strength |
28.00 J/m |
Unnotched Izod Impact Strength |
662 J/m |
HDT at 0.45 MPa |
55°C |
HDt at 1.82 MPa |
49°C |