Bambu Lab PLA Wood Series
Bambu Lab PLA Wood Series
Bring wood-inspired colour and a fine, matte texture to your prints. Made with PLA and natural wood powder, PLA Wood comes in six shades, with 1 kg of filament on a reusable spool and support for the AMS range and RFID identification.
For product enquiries, material questions and printing support, contact the team through 3DMart HK Technical Support.
Natural Wood Texture
Fine wood powder gives the PLA a subtly grainy, wood-like feel.
Refined Matte Finish
A matte surface helps make layer lines less noticeable.
RFID Identification
Compatible AMS systems can read the filament’s stored print settings.
1 kg with Spool
The filament-with-spool version includes a Basic Reusable Spool.
Dry after opening. PLA Wood contains natural wood powder and is not compatible with a 0.2 mm nozzle. Use one of the supported nozzle options below.
A Natural Wood Look and Feel
PLA Blended with Wood Powder
The wood-filled PLA gives decorative models, trays and miniature furniture a natural-looking material finish. It is a PLA composite containing wood powder, not solid timber.
A Matte Finish with Finer-Looking Layers
Less Shine, More Texture
The matte finish softens the appearance of layer lines on curves and decorative details. The final surface still depends on the model and print settings.
Combine Wood Accents with Other PLA
Mix Colours and Surface Finishes
Combine PLA Wood with Bambu PLA Basic or PLA Matte to place wood-like accents alongside other colours in one model. Configure multicolour printing for your printer, material system and filament profiles.
Six Natural Wood-Inspired Colours
Black Walnut
#4F3F24
Classic Birch
#918669
White Oak
#D6CCA3
AMS, RFID and Hardware Compatibility
Simplify Material Setup with RFID
The filament’s RFID stores printing parameters for a compatible Bambu AMS system to read. Drying and correct nozzle and build plate selection are still required.
| AMS compatibility | Listed as compatible with all AMS series on the Asia product page; use a feeding configuration supported by your printer. |
|---|---|
| Hardened steel nozzle | 0.4 / 0.6 / 0.8 mm |
| Stainless steel nozzle | 0.4 mm |
| Unsupported nozzle | 0.2 mm |
| Build plates | Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate |
| Adhesive | Bambu Liquid Glue / Glue Stick; follow the build plate instructions. |
Drying, Storage and Print Settings
Dry After Opening, Then Store Airtight
Natural wood powder makes PLA Wood more moisture-sensitive. Factory drying and vacuum packaging do not remove the need to dry it after opening, as transport and storage can affect moisture levels.
Reseal with desiccant immediately after use. Keep printing and storage humidity below 20% RH, and dry again as needed after prolonged storage.
| Forced-air drying oven | 55°C for 8 hours |
|---|---|
| X1-series heatbed drying | 65–75°C for 12 hours; follow the manufacturer’s X1 drying procedure only. |
| Printing / storage humidity | < 20% RH; sealed with desiccant. |
| Nozzle temperature | 190–240°C |
| PEI bed temperature | 35–45°C with glue; TDS V1.0 reference setting. |
| Cooling fan | On |
| Printing speed | < 250 mm/s |
| Retraction length | 0.6–1.0 mm |
| Retraction speed | 20–40 mm/s |
| Chamber temperature | 25–45°C |
Material Performance Reference
| Density | 1.21 g/cm³ |
|---|---|
| Melt flow index | 29.4 ± 1.7 g/10 min at 210°C / 2.16 kg |
| Melting temperature | 156°C |
| Glass transition temperature | 54°C |
| Vicat softening temperature | 64°C |
| Heat deflection: 1.8 MPa | 57°C (ISO 75) |
| Heat deflection: 0.45 MPa | 60°C (ISO 75) |
| Saturated water absorption | 1.25% at 25°C / 55% RH |
Swipe the mechanical properties table horizontally on smaller screens.
| Property | X–Y direction | Z direction |
|---|---|---|
| Young’s modulus | 2,360 ± 190 MPa | 1,770 ± 150 MPa |
| Tensile strength | 26 ± 5 MPa | 15 ± 4 MPa |
| Elongation at break | 15.3 ± 3.1% | 4.5 ± 1.7% |
| Flexural modulus | 2,780 ± 120 MPa | 1,975 ± 140 MPa |
| Flexural strength | 55 ± 4 MPa | 28 ± 4 MPa |
| Impact strength | 15.7 ± 3.7 kJ/m² | 5.6 ± 1.2 kJ/m² |
| Notched impact strength | 6.3 ± 2.2 kJ/m² | Not listed |
Source: Bambu Lab PLA Wood TDS V1.0. Tensile and elongation values follow ISO 527; flexural values ISO 178; impact values ISO 179. Samples were printed at 220°C nozzle temperature, 35°C bed temperature, 200 mm/s and 100% infill, then annealed and dried at 55°C for 8 hours before testing. Actual part performance varies with geometry, orientation, equipment and settings; these values are not guaranteed for every print.
Specifications and Box Contents
| Material | PLA with natural wood powder |
|---|---|
| Filament diameter | 1.75 ± 0.03 mm |
| Net filament weight | 1 kg |
| Version | Filament with spool |
| Spool | Basic Reusable Spool |
PLA Wood Filament × 1
1 kg of filament supplied on a reusable spool.
Desiccant and Packaging
One desiccant pack and one product box. This description covers the filament-with-spool version.
Important Usage Notes
Print in a well-ventilated area, or use effective filtration or extraction. PLA Wood is not a food-contact-grade material; do not use printed parts to hold or directly contact food. Keep filament and fragments away from young children and pets. Store cool, dry and out of sunlight, away from heat.
Bambu Lab PLA Wood FAQ
Is PLA Wood made entirely from wood?
No. It is a blend of PLA and natural wood powder, designed for a wood-like appearance and feel rather than the properties of solid timber.
Should I dry a newly opened spool?
Yes. Transport and storage can affect moisture levels. The manufacturer recommends drying after opening; the forced-air oven reference setting is 55°C for 8 hours.
Can I use a 0.2 mm nozzle?
No. The manufacturer lists it as incompatible. Supported options are 0.4 mm stainless steel and 0.4 / 0.6 / 0.8 mm hardened steel nozzles.
Can it be used in AMS or AMS lite?
Yes. The Asia product page lists compatibility with all AMS series. The material system must still be connected in a configuration supported by your printer.
Will a colour look identical in every print?
Natural wood powder and drying conditions can create slight colour differences. Screen swatches are references, not a guarantee of the appearance of every batch or print.
Can I print tableware or food containers?
No. PLA Wood is not a food-contact-grade material. Printed parts should not directly contact or hold food.
Bambu Lab PLA Wood Support at 3DMart HK
Returns and after-sales arrangements for filament are subject to your order and the applicable 3DMart HK terms.
For product, filament-condition or print-setting questions, contact 3DMart HK Technical Support.
For the general service process, see the 3DMart HK repair and warranty procedure. This reference does not extend a printer warranty plan to filament.
For purchase and usage enquiries, email client@3dmart.com.hk.
Contact 3DMart HK about PLA WoodAMS、RFID 與配件相容性
以 RFID 簡化材料設定
線材的打印參數儲存於 RFID，供相容的 Bambu AMS 系統讀取。使用前仍須完成乾燥，並確認噴嘴及平台選擇。
| AMS 相容性 | 官方 Asia 頁面列明支援所有 AMS 系列；請配合所用打印機的相容供料配置。 |
|---|---|
| 硬化鋼噴嘴 | 0.4／0.6／0.8 mm |
| 不鏽鋼噴嘴 | 0.4 mm |
| 不相容噴嘴 | 0.2 mm |
| 打印平台 | Cool Plate SuperTack、Smooth PEI Plate、Textured PEI Plate |
| 黏著劑 | Bambu Liquid Glue／Glue Stick；按平台指引使用。 |
乾燥、防潮與打印設定
開封後先乾燥，再密封保存
PLA Wood 的天然木粉較易吸濕。即使原廠已乾燥並真空包裝，運送及儲存環境仍可能影響含水量，因此使用前應先充分乾燥。
打印後立即密封並加入乾燥劑，打印及保存環境建議低於 20% RH。長期存放前後均應注意乾燥及防潮。
| 乾燥：鼓風乾燥箱 | 55°C，8 小時 |
|---|---|
| 乾燥：X1 系列熱床 | 65–75°C，12 小時；僅按原廠 X1 乾燥程序操作。 |
| 打印／保存濕度 | < 20% RH；密封並配合乾燥劑。 |
| 噴嘴溫度 | 190–240°C |
| PEI 熱床溫度 | 35–45°C（配合黏著劑；TDS V1.0 參考值） |
| 冷卻風扇 | 開啟 |
| 打印速度 | < 250 mm/s |
| 回抽長度 | 0.6–1.0 mm |
| 回抽速度 | 20–40 mm/s |
| 腔體溫度 | 25–45°C |
材料性能參考
| 密度 | 1.21 g/cm³ |
|---|---|
| 熔融指數 | 29.4 ± 1.7 g/10 min（210°C／2.16 kg） |
| 熔融溫度 | 156°C |
| 玻璃轉移溫度 | 54°C |
| Vicat 軟化溫度 | 64°C |
| 熱變形溫度：1.8 MPa | 57°C（ISO 75） |
| 熱變形溫度：0.45 MPa | 60°C（ISO 75） |
| 飽和吸水率 | 1.25%（25°C／55% RH） |
機械性能表可在手機上左右滑動。
| 性能項目 | X–Y 方向 | Z 方向 |
|---|---|---|
| 楊氏模量 | 2,360 ± 190 MPa | 1,770 ± 150 MPa |
| 拉伸強度 | 26 ± 5 MPa | 15 ± 4 MPa |
| 斷裂伸長率 | 15.3 ± 3.1% | 4.5 ± 1.7% |
| 彎曲模量 | 2,780 ± 120 MPa | 1,975 ± 140 MPa |
| 彎曲強度 | 55 ± 4 MPa | 28 ± 4 MPa |
| 衝擊強度 | 15.7 ± 3.7 kJ/m² | 5.6 ± 1.2 kJ/m² |
| 缺口衝擊強度 | 6.3 ± 2.2 kJ/m² | 未列出 |
數據來源：Bambu Lab PLA Wood TDS V1.0。拉伸／伸長數據按 ISO 527；彎曲數據按 ISO 178；衝擊數據按 ISO 179。測試樣本以 220°C 噴嘴、35°C 熱床、200 mm/s、100% 填充打印，測試前於 55°C 退火及乾燥 8 小時。實際成品性能受模型、方向、設備及參數影響，不能把表內數據視為所有打印件的保證值。