xTool SafetyPro™ AP2/AP Max Smoke Purifier
xTool SafetyPro™ AP2 Smoke Purifier
High-Density Filtration for Complete Peace of Mind
6 Filters, Weighing Approximately 9kg, for Multi-Layered Purification
With 6 filters weighing 9kg (excluding the cyclone layer, the remaining 5 filters weigh about 8kg), it ensures maximum removal of smoke and odors, safeguarding respiratory health during laser processing.
99% Capture of Large Particles
36 small cyclones operate in parallel, generating ultra-strong centrifugal force to effectively separate dust and dirt and prevent filter clogging.
Extend Filter Lifespan by 10 Times
With the cyclone separator, all large particles are separated, extending the filter's lifespan by 10 times compared to filters without a cyclone separator.
*Results estimated based on residues generated from 3mm acrylic and common wood laser cutting.
Washable and Reusable
It is easy to disassemble, wash, and reuse. Simply wash to keep the cyclone separator as good as new, significantly extending the filter's lifespan.
Strong Airflow, Rapid Purification
The AP2's 150 m³/h airflow effectively purifies dust generated from desktop operations. The AP2 Max, with its powerful airflow of up to 700 m³/h, is designed for large and heavy-duty industrial laser and welding operations.
AP2 Max Exclusive
Decomposes Formaldehyde for Deeper Cleaning
The formaldehyde filter effectively captures and decomposes harmful formaldehyde molecules, breaking them down into harmless water and carbon dioxide, thus achieving a more thorough purification effect.
Beyond Convenience, Smarter Than You Imagine
Thoughtfully Designed for a Better Experience
Optimal Dust Collection Solution
Ultra-thin Cyclone Separation Technology
Product Content List
xTool SafetyPro™ AP2 Smoke Purifier
xTool SafetyPro™ AP2/AP Max Smoke Purifier
FAQ
Is AP2 Max compatible with laser cutters and welders from other brands?
Yes, it is compatible if your machine requires an exhaust volume of 700 m³/h or less, and the exhaust port diameter is between 60-110 mm or 200-250 mm. However, smart features will not be available.
Is the AP2 compatible with laser devices from other brands?
The AP2 is designed for machines with an exhaust volume of 150 m³/h or less. If your machine's exhaust volume is within this range, it should be compatible with the AP2. However, you will need to prepare an exhaust port adapter yourself.
This product supports 3-inch exhaust pipes. It is compatible with laser printers, hybrid 3D printers with laser modules, and DTF 3D printers, as long as their exhaust pipe dimensions meet this requirement.
Why is xTool P3 not compatible with AP2?
The AP2 is designed for machines with an exhaust volume of 150 m³/h or less, while the P3 has an exhaust volume of 238 m³/h. The AP2's airflow cannot meet this demand. Therefore, if the P3 is connected to the AP2 for cutting, a significant amount of smoke and odor will still be generated.
Can the exhaust be vented directly into the room?
Yes, the exhaust can be vented directly into the room because our purified exhaust meets the air quality requirements for indoor direct exhaust.
How often should the cyclone separator be cleaned?
It is recommended to clean it every 6 months, but users can adjust this based on actual usage.
Product Specifications
| Item | Specification |
|---|---|
| xTool SafetyPro™ AP2 Smoke Purifier | |
| Compatible Models (Normal Mode) | All xTool machines (63.5mm exhaust port), also compatible with laser machines of other brands |
| Compatible Models (Smart Mode) | xTool M1 Ultra, F1 Ultra, P2S, S1 |
| Product Dimensions | 290 × 491 × 542 mm |
| Product Weight | 20.7 kg |
| Control Mode | Touch buttons, four-level adjustment |
| Pre-filtration System | Cyclone separation |
| Rated Power | 220W |
| Filter Layers | Super cyclone filter Pre-filter Medium-efficiency filter Activated carbon layer Ultra-high density carbon mesh High-efficiency filter |
| Noise | 55 dB |
| xTool SafetyPro™ AP2 Max Smoke Purifier | |
| Power Input | AC 100–240V / 50–60Hz / 900W |
| Air Volume | 700 m³/h |
| Filtration System | 1 Primary filter element 2 Medium-efficiency filter element 3 Activated carbon filter element 4 High-density carbon mesh filter element 5 Formaldehyde removal filter element 6 High-efficiency filter element |
| Number of Cyclones | 72 |
| Air Volume Control Range | 1–100% |
| Noise | 65 dB |
| Dimensions | 662 × 452 × 845 mm |
| Compatible Models | xTool P3, MetalFab, and all existing xTool models |