Formlabs Form 4BL Large-Format 3D Printer Bundle
Choose Add-on:
Couldn't load pickup availability
Formlabs Form 4BL Large-Format 3D Printer Bundle
Formlabs Form 4BL Large-Format 3D Printer Bundles
Form 4BL - A New Era of Medical Manufacturing
Formlabs introduces the Form 4BL, a new generation large-format printer designed specifically for medical and dental applications, with upgraded speed, reliability, and biocompatibility. Treat urgent cases with large medical parts or produce multiple parts in a single print job to accelerate product development and keep production running.
Large-format prints in just 6 hours¹ with a build volume 4.6 times larger than Form 4.
The Form 4BL is powered by Formlabs' new Low Force Display™ (LFD) print engine, with a build volume of up to 24.2 liters, 4.6 times larger than the Form 4B.
·Form 4BL: 353 × 196 × 350mm (24.2 L)
·Form 4B: 200 x 125 x 210mm (5.2 L)
Equipped with an ultra-high-power LED backlight unit and the LPU 4L optical module, it rapidly and precisely cures resin, delivering extremely fast print speeds across the entire build platform for excellent print quality and accuracy.
Easy-to-use printerLearn to print in just 15 minutes
· With the free PreForm software, you can go from CAD to print in minutes with just a few clicks.
· Upgraded automatic rapid resin dispensing.
· Monitor print status and manage your printer from anywhere with the integrated camera, printer diagnostics, and free Dashboard software.
· Use the quick-release Build Platform Flex, Form Wash, and Form Cure for simple, effective post-processing.
Top-tier and flexible platform
· Utilize high-performance materials optimized for impact resistance, rigidity, flame retardancy, flexibility, and more.
· Use non-acrylate chemistries such as true silicones, ceramics, and urethanes.
· Certified third-party materials and open mode available.
· Customize print performance for specific parts with editable and shareable settings.
Form 4BL - Basic Package
· Form 4BL Printer
· Form 4L Resin Tank
· Form 4L Mixer
· Form 4L Flex Build Platform
· Form 4L Finish Kit: Rinse Bucket
· Form 4L Finish Kit: Cleaning Tools
· Open Material Mode for Form 4L generation
Form 4BL - Complete Package
· Form 4BL Printer
· Form 4L Resin Tank
· Form 4L Mixer
· Form 4L Flex Build Platform
· Form 4L Finish Kit: Cleaning Tools
· Form Wash L V2
· Form Cure L V2 120V
· Resin Pump (Form 4)
· Form 4BL Dental and Medical Service Plan 3 Years
· Open Material Mode for Form 4L generation
Form 4BL Package Comparison Table
| Included Items | Basic Package | Complete Package |
|---|---|---|
| Form 4BL Printer | ✓ | ✓ |
| Form 4L Resin Tank | ✓ | ✓ |
| Form 4L Mixer | ✓ | ✓ |
| Form 4L Flex Build Platform | ✓ | ✓ |
| Form 4L Finish Kit: Rinse Bucket | ✓ | — |
| Form 4L Finish Kit: Cleaning Tools | ✓ | ✓ |
| Open Material Mode for Form 4L generation | ✓ | ✓ |
| Form Wash L V2 | — | ✓ |
| Form Cure L V2 | — | ✓ |
| Resin Pump (Form 4) | — | ✓ |
| Dental and Medical Service Plan (3 Years) | — | ✓ |
👉Learn more about Formlabs 3D Printing Resins
Learn more about Formlabs products
- Contact Us -
3DMart offers more than just 3D printing; we provide three major services: "3D Printing Service", "3D Scanning Service", and "Spatial 3D Scanning Service"!!
Follow our fan page for the latest updates:
Facebook | Instagram | Threads
Product Specifications
| Technology | Masked Stereolithography (MSLA) |
|---|---|
| Printer Engine | Low Force Display (LFD)™ |
| Key Components of the Print Engine | ・Backlight Unit ・Light Processing Unit 4L (LPU 4L) ・Release Texture ・Flexible Film Resin Tank ・Intelligent Control Systems ・High-Speed Automatic Resin Handling |
| Light Source | ・Backlight Unit: 145 uniform LEDs, plano-convex lens array, and integrated air cooling ・405nm light wavelength ・16mW/cm² optical power intensity (at the print plane) ・46μm pixel size |
| Build Volume (W × D × H) | 35.3 × 19.6 × 35.0 cm 24.2 liters |
| Build Area | 692 cm² |
| Maximum Part Length⁶ | Not measured |
| Maximum Print Speed | 80 mm/h |
| Average Print Speed (100μm layer height) | ・Average: 40 mm/h (all materials) ・Range: 16–50 mm/h (material dependent) |
| Typical Dimensional Accuracy (XY)³ | 1–30 mm features: ±0.15% (lower limit: ±0.02 mm) 31–80 mm features: ±0.3% (lower limit: ±0.06 mm) 81–150 mm features: ±0.3% (lower limit: ±0.15 mm) |
| Print Layer Thickness | 25–200 μm |
| Horizontal Accuracy | 50 μm sub-pixel resolution with pre-tuned anti-aliasing Improved detail and sharp features compared to Form 3 series |
| Resin Tank Lifespan | 75,000 layers or more (for any Formlabs material) e.g., approximately 190 prints with an average height model (39 mm tall), any resin, and 100 μm layer height setting |
| Resin Cartridge Type | Next-generation resin cartridge 5–10x faster filling speed 63% less waste 30% less shelf space |
| Resin Heating | High-speed conductive resin heating with infrared temperature sensing |
| Internal Temperature | Automatically heats resin to 25–45°C, depending on material |
| Force Sensing | Z-axis force sensor: automatically optimizes print quality and speed based on part geometry and selected material |
| Supports | Automatically generated, easily removable |
| Biocompatible Materials | Supported |
| Materials | 38 industry-leading Formlabs materials (including 15 biocompatible materials), with support for third-party materials using Open Material Mode. More innovative materials are continuously being developed. |
| Printer Weight | 58.5 kg |
| Printer Dimensions | 66.4 × 52.8 × 79.4 cm |
| Minimum Operating Dimensions (W × D × H) | 88.9 × 116.9 × 81.3 cm |
| Operating Environment | 18–28 °C |
| Power Requirements | 100–240 VAC 9A 50/60 Hz 900W |
| Connectivity | Wi-Fi (2.4 and 5 GHz; IEEE 802.11 b/g/n/ac, WPA/WPA2) Ethernet (1000 Mbit) USB-C 2.0 |
| Printer Control⁹ | 7-inch interactive touchscreen 1280 × 800 resolution Languages: English, German, French, Spanish, Italian, Japanese, Simplified Chinese |
| Camera | Built-in camera 2592 × 1944 resolution (5MP) Remote monitoring, print history, and print timelapse Easily disabled, covered, or removed |
| Sensors and Control Systems | 6 upgraded sensors for precise control of resin temperature, level, print force, and print status: High-speed conductive resin heating with infrared temperature sensing Ultrasonic resin level sensor: monitors resin tank liquid volume Z-axis force sensor: controls and reduces print force Resin cartridge load sensor: precisely measures resin level in the cartridge Printer leveling sensor Camera |
| Software | PreForm, Dashboard |
| PreForm Compatibility | Windows 10 (64-bit only, ARM not supported) and above macOS 13 or higher OpenGL 2.1 Microsoft C++ runtime (Windows only) 4GB RAM (8GB recommended) |
| PreForm Accepted File Types | Supports STL, OBJ, and 3MF file input Exports FORM files |