Bambu Lab X2D 3D Printer Series

Bambu Lab X2D｜3DMart, Taiwan's official distributor for Bambu Lab｜
Affordably Priced Dual Extruder 3D Printer
3DMart Warranty Product Repair Application Process and Related Regulations

Dual nozzle system｜Stop agonizing over supports – simply peel them away.

The main nozzle prints the part, while the auxiliary nozzle handles the support structures.
The X2D delegates all the cumbersome support work to the auxiliary nozzle, using its own material.
It can provide full support for steep overhangs, fabric folds, and internal channels, then peel away effortlessly.

More colors, more details, and more fun.

Fuse PLA and TPU in one model. Create bags, handles, and bumpers that can be used directly off the print bed.

Instant nozzle switching. Enjoy faster color changes, smoother transitions, and less waste.

Finer. Sharper. True to design.

Touch, switch, done.

Unlike traditional motor-driven systems, the X2D integrates gears and a trigger mechanism into the toolhead. The nozzle replacement lever touches the trigger arm, driving the internal gear set to change the nozzle. No additional weight is added for easy replacement.

A lighter toolhead means less inertia and vibration. Even at full speed, the surface remains pristine—all the way to the top.

Fast cooling. Before gravity takes its toll.

Two air intakes are better than one. Newly extruded filament is soft, but the X2D printer's dual air intakes on both sides instantly blow cool air into the print chamber. This continuous air exchange stabilizes each layer, especially for low-temperature filaments like PLA.

It's not enough to be warm, it needs to be evenly heated.

The X2D features a 300°C nozzle and a 65°C active heated chamber, sufficient for most engineering filaments. The active heated chamber conducts heat evenly, ensuring strong adhesion between layers.

Calibration adapts to wear and material changes.

Bambu Lab's Flow Dynamics Calibration creates a non-linear model that evolves over time, detecting and compensating for the effects of nozzle wear or damp filament.

PMSM Servo System: Smoother surfaces begin inside the extruder.

Bambu Lab's exclusive PMSM servo system samples at 20 kHz, dynamically adjusting torque to eliminate minor fluctuations before they reach the surface.

Smooth and delicate surfaces.

Compensation ensures sharp corners and clear details.

AI camera monitors for you at all times.

Before printing, the AI live preview camera and toolhead camera scan the bed; during the process, they monitor for issues such as tangles and nozzle clogs.

Fully equipped sensors cover every critical stage.

The entire system consists of 31 sensors that monitor the feed path, printing process, thermal environment, and machine safety in real-time.

Fresh air, always.

Three-stage filtration system: G3 pre-filter, H12 HEPA filter, and coconut shell activated carbon layer effectively reduce odors and particulate matter.

Fits perfectly in the living room.

Toolless nozzle changes.

Quiet enough for nighttime printing.

View every detail remotely.

A million switches, still smooth.

A 3D printer that updates automatically, just like your phone.

Product Variation Notice

Depending on the batch, the nozzle switching area may or may not include a silicone wiper. Performance is identical, achieved through software.

The X2D is a new chapter for the X1C. It adds a dual extruder system supporting up to 25 colors; an active heated chamber (max 65°C) for processing engineering filaments; a servo extruder with real-time flow sensing and filament tangle detection; expanded AI monitoring capabilities with live view and toolhead cameras; and vision encoder-based motion calibration. The X2D improves and further enhances all the advantages of the X1C.

For more product specifications, please refer to this page.

When printing with the main nozzle, the maximum travel speed is 1000 mm/s and the maximum acceleration is 20,000 mm/s².

Yes, the left and right hotends are structurally and component-wise identical and can be used interchangeably in both left and right positions.

It actively draws air from within the print chamber. In cooling mode (for PLA and other low-temperature filaments), it works with the adaptive airflow system to dissipate heat and exhaust fumes. After printing high-temperature filaments, enable the "Purge Air at Print End" function to clear residual fumes.

Single hotend: Supports up to 4 AMS 2 Pro and 8 AMS HT units (a total of 12 units, 24 slots).

Dual hotend: When combined with the maximum AMS configuration, it allows for up to 25 color printing.

Yes. High-flow hotends significantly increase print speed while maintaining print quality, reducing print time by up to 30% compared to standard nozzles.

When purchasing Bambu Lab related machines, 3DMart offers you a choice of a one-year Standard or Enhanced warranty service. For any operational questions, please contact 3DMart by email.

👨💻【Enhanced Warranty Service Plan】
 | No round-trip shipping fees | No inspection fees | No repair fees |
 3DMart arranges free pickup of equipment for repair → 3DMart engineers perform repairs → Upon completion, 3DMart arranges delivery back to you
• Our company cannot accept the addition of the [Enhanced Warranty Plan] after shipment. Please confirm and select the warranty plan that meets your needs when placing your order.
• If there is an issue with the machine, please first fill out the technical support form