Bambu Lab X2D 3D Printer Series

Bambu Lab Hong Kong Agent | 3DMart HK

Affordable Dual-Nozzle 3D Printer

➔ 3DMart Maintenance, Repair Application Process, and Related Regulations

 

Dual Nozzle System | Stop struggling with supports – peel them off with ease.

The main nozzle prints the part, and the auxiliary nozzle prints the support structures.
The X2D leaves all the tedious support work to the auxiliary nozzle, which uses its own material.
It can provide full support for steep overhangs, fabric folds, and internal channels, then peel off easily.

Add more colors, more details, and more fun.

Fuse PLA and TPU in one model. Create bags, handles, and bumpers that can be used directly off the print bed.

Instant dual-nozzle switching. Enjoy faster color changes, smoother transitions, and less waste.

Finer. Sharper. True to design.

Tap, Switch, Done.

Unlike traditional motor-driven systems, the X2D integrates the gears and trigger mechanism into the toolhead. The nozzle change lever touches the trigger arm, driving the internal gear set to change the nozzle. This allows for easy changes without adding extra weight.

A lighter toolhead means less inertia and vibration. Surfaces remain impeccable – even at full speed – right to the top.

Rapid cooling. Before gravity takes hold.

Two inlets are better than one. The freshly extruded filament is soft, but the X2D printer's dual inlets on both sides instantly blow cold air into the print chamber. This continuous air exchange stabilizes each layer, especially for low-temperature filaments like PLA.

Not just hot enough, but uniformly heated.

The X2D uses a 300°C nozzle and a 65°C active heated chamber, sufficient for most engineering filaments. The active heated chamber conducts heat evenly, ensuring strong adhesion between layers.

Calibration adjusts for wear and material changes.

Bambu Lab’s Flow Dynamics Calibration creates a non-linear model that evolves over time, detecting and compensating for the effects of nozzle wear or damp filament.

PMSM Servo System: Smoother surfaces start inside the extruder.

Bambu Lab's exclusive PMSM servo system samples at 20 kHz, dynamically adjusting torque to eliminate minor fluctuations before they reach the surface.

Smooth and delicate surfaces.

Compensation ensures sharp corners and clear details.

AI camera monitors at all times.

Before printing, the AI live preview camera and toolhead camera scan the bed; during the process, they monitor for issues such as tangling and nozzle clogs.

Equipped with a full suite of sensors covering every critical stage.

The entire system consists of 31 sensors, monitoring the feed path, printing process, thermal environment, and machine safety in real-time.

Fresh air, always.

Three-stage filtration system: G3 pre-filter, H12 HEPA filter, and coconut shell activated carbon layer, effectively reducing odors and particulates.

Fits in the living room.

No-tool nozzle changes.

Quiet enough for overnight printing.

View every detail remotely.

A million switches, still smooth.

A 3D printer that updates automatically, like a phone.

Product Difference Notice

Depending on the batch, the nozzle switching area may or may not include a silicone wiper. Performance is identical through software.

FAQ What are the main differences between X2D and X1C?

The X2D is a new chapter for the X1C. It adds a dual-nozzle system, supporting up to 25-color printing; an active heated chamber (max 65°C) for engineering filaments; a servo extruder with real-time flow sensing and filament tangle detection; expanded AI monitoring with live view and toolhead cameras; and support for vision encoder-based motion calibration. The X2D improves and enhances all the benefits of the X1C.

For more product specifications, please refer to this page.

What are the maximum print speed and acceleration of the X2D?

When printing with the main nozzle, the maximum travel speed is 1000 mm/s, and the maximum acceleration is 20,000 mm/s².

Are the hotends on the left and right sides the same?

Yes, the left and right hotends are identical in structure and components and can be used interchangeably in both left and right positions.

What is the function of the chamber exhaust fan on the X2D's rear panel?

It actively extracts air from the print chamber. In cooling mode (for PLA and other low-temperature filaments), it works with the adaptive airflow system to dissipate heat and exhaust fumes. After printing with high-temperature filaments, enable the "Purge Air at End of Print" function to clear residual fumes.

How many AMS units can the X2D connect to?

Single Hotend: Supports up to 4 AMS 2 Pro and 8 AMS HT units (total 12 units, 24 slots).

Dual Hotend: Can achieve up to 25-color printing when combined with the maximum AMS configuration.

Does the X2D support high-flow nozzles?

Yes. High-flow hotends significantly increase print speed while maintaining print quality, reducing print time by up to 30% compared to standard nozzles.

---

One-Year Warranty & Repair Instructions