Do you remember in our previous articles where we introduced the basic operation of 3D scanners and tested scanning small objects and human busts?
If not, no worries, let's go back and review the article!
This time, we're going to show you how to scan large objects using a 3D scanner. We're still using the EinScan 3D scanner from Shining 3D.
We're using a motorcycle front fairing that we got from a nearby motorcycle shop. Its shape is like a cool mask, and it's a very suitable object for 3D scanning!
Let's take a look at the motorcycle fairing we're about to scan! It has a very eye-catching royal blue and stylish design~
The first step is to spray the object with powder, just like how women put on makeup (powder) to be noticed when they go out. Spraying powder can make the scanning process smoother,
helping the scanner grasp the object's shape more quickly. (Note: Not all objects need powder. Objects that are reflective or black usually need powder.
For other objects, you can scan first and then decide.)
Aim the scanner at the front of the fairing. You can use a tripod to elevate the scanner for an easier scanning process. Remember to adjust the angle of the fairing to get a more complete scan file.
You can see that the scanner's automatic calibration technology is excellent. In less than a minute, the front shape can be almost completely rendered, showing the motorcycle fairing's cool and streamlined design.
After the front fairing is scanned, turn to the back and continue. The powdering process needs to be done again.
The back has more detailed parts, so it will take a bit longer to scan than the front. However, the details can be presented very precisely.
After scanning, some fine adjustments will need to be made in 3D software to ensure better quality when printing later.
Finally, the final 3D scanned image file after detailed adjustments by the engineer.
We will also continue to publish articles about printing scaled-down motorcycle fairings using this scanned 3D file.
We will continue to release more articles related to scanning. Interested friends are welcome to follow our latest news.
We would like to particularly thank the handsome royal blue motorcycle fairing generously sponsored by Sanyang Motorcycle near 3DMart.
Please look forward to the birth of our 3D printed motorcycle fairing!