【3D Spatial Scan Tutorial】Matterport Pro3 Quick Start Guide
Did you buy a Matterport Pro3 3D spatial scanner and don't know how to use it yet? This comprehensive guide in Chinese will help you quickly get started!
【Camera Components】
A. Magnetic Lens Cap
B. Camera Lens
C. Battery
D. Tripod Head
E. Tripod
F. Power Button
G. Display Screen
H. LiDAR Mirror
I. Tripod Mounting Socket
J. Battery Compartment
【Charging Kit Components】
A. AC Wall Adapter
B. Cable
C. Battery Charging Dock
【Setup】
1. Adjust the tripod height to 4.5 feet (1.37 meters).
2. Screw the tripod head tightly onto the center post of the tripod base.
3. Remove the Pro3 from its case. Gently pull the red ribbon to lift the camera.
4. Insert the battery. Place the camera on its side on a flat surface. Align the battery with the pins inside the battery compartment and snap it into place. Do not force the battery; if you feel you need to apply a lot of force, stop and ensure it is properly aligned.
5. Open the clips on the side of the tripod head. Align the mounting socket at the bottom of the camera with the top of the tripod head and clip it on, then close the side clips to secure the camera while keeping it stable.
- The camera's rotation axis is aligned with the lens, not with the center of the camera. This unique profile is designed for optimal capture, and proper installation ensures stability and security.
6. Power on. Press and hold the power button below the display screen on the back of the camera (for approximately 2 seconds).
- Remove the magnetic lens cap. The camera display screen shows the Matterport logo, indicating it is booting up and warming up.
【Pairing Your Device and Camera】
1. Download the Matterport app for your iOS or Android device to start using the Pro3.
2. Confirm camera readiness. Once startup is complete, the "Ready to Pair" symbol will appear on the camera screen.
3. Enable Bluetooth. Ensure Bluetooth is turned on in your device settings.
4. Open the Matterport app, open an "Existing Job" or start a new job by tapping the "+New Job" button. Then, tap the source selector button and select Matterport Pro3 to connect to the camera.
5. Check the connection. Once the camera and device are connected, the "Connected" symbol will appear on the Pro3 display screen, along with the "Ready to Scan" symbol.
【Indicator Guide】
| Connected Indicates the camera is connected to a phone or tablet. |
 | Ready to Scan Indicates the camera is ready for quick point-to-point scanning. |
 | Scanning Green lines indicate scanning progress as the camera rotates. |
 | Ready to Move After scanning is complete, indicates the camera is ready to move to the next scan point. |
 
| Error Status Check the Matterport app or visit go.mp/pro3 for on-screen error codes. |
  | Battery Status When the camera is off, tap the power button to check the battery level without powering on the camera. |
【Maintenance】
-
Transporting the Camera
The Matterport Pro3 Camera is sensitive and precisely calibrated. Always transport the camera in a padded carrying case or storage box and handle it with care. If traveling by air, we recommend keeping the camera in your carry-on luggage.
-
Lens Care
Treat the Pro3 Camera lens as you would a DSLR camera lens. To wipe away fingerprints, use a camera lens cleaner and a microfiber cloth. Always dust the lens first, then apply cleaner to the cloth (not directly to the lens). The rotating mirror requires similar care.
-
Storage and Temperature
Do not use or place the Pro3 in very high temperatures. Battery performance will degrade, and its lifespan will be shortened. The camera should be stored at room temperature with the battery removed.
【Safety Precautions】
Stability
Always ensure the camera is operated correctly on a flat and stable surface. If the Pro3 tips over, it may cause personal injury or damage to the camera.
General Use
 | Do not disassemble or dismantle the camera. There are no user-serviceable parts inside the camera. Use only Matterport-recommended equipment and accessories, and follow the setup instructions in this guide. |
Rotating Mirror
 | The rotating mirror rotates at high speed during and for a short time after scanning. To protect your personal safety and avoid damage to the Pro3, please keep your hands, hair, or any other objects at a safe distance from the rotating mirror assembly while it is rotating. |
This product requires a membership to use.Click here to learn about cloud storage plans
Follow our Facebook page to stay updated: https://www.facebook.com/3dmart.com.tw/
https://www.instagram.com/3dmart/