[Cura Tutorial] Advanced Settings Tutorial

With countless versions of Cura and over 200 adjustable settings, are you fully familiar with all of Cura's settings?
Most users, like us, probably only use a few basic parameters such as layer height, infill, and speed.
Therefore, 3DMART has specially compiled a few key settings that you might not normally use,
but which can improve your print quality or make your experience more convenient.
The most important thing is that it's "completely free"! This offer is for customers who have purchased printing equipment from 3DMART!
This is a rare opportunity, and spots are limited. Click on the registration page now to seize the chance to improve your 3D printing skills!

Course Title: Cura Advanced Settings Tutorial
Target Audience: Customers who use Cura as their slicing software
Course Dates: First session: 106.09.18 (Monday); Second session: 106.10.16 (Monday)
Course Time: 15:00-16:30
Number of Sessions/Duration: 1 session / 90 min
Course Location: 3DMART Taipei Headquarters
Training Fee:
First session is completely free for customers who purchased equipment from 3DMART!;
Second session registration is open at NT$1,800 / per person.
 
【Registration Link】
https://drive.google.com/open?id=15Ub5K68XXlcuo8qF0n_-DEA77gYOe3B5k0z2TnIWwi4
 
【Course Outline】
Introduction to Cura's basic interface, dual-extrusion printing operations, automatic pause for material or parameter changes, infill methods, tolerance adjustment, improving surface quality, repairing graphic errors, and special modes and case studies.
【Course Content】

1. Dual extrusion printing
2. Automatically change parameters or pause and retract material at a specific layer
3. Infill between walls
4. Horizontal expansion
5. Object Z seam alignment
6. Z-Hop
7. Avoid printed parts
8. Fan cooling
9. Support horizontal expansion
10. Overlap compensation
11. Remove holes in an object
12. Massive stitching
13. Special modes
14. Experimental modes

【Course Instructor】

Mr. Chang Shao-Gang, Sales Engineer at 3DMART

【Target Audience】

Customers who need to use Cura as their 3D printing slicing software
 
【Class Size】

10 people (maximum 1 person per company)

【How to Register】

Fill out the form below
https://drive.google.com/open?id=15Ub5K68XXlcuo8qF0n_-DEA77gYOe3B5k0z2TnIWwi4

【Related Regulations】

Our company reserves the right to modify the course content and schedule. Any changes to the course or teaching schedule will be announced in advance.

【Contact Information】
 
3DMART Co., Ltd.

Address: 9F-5, No. 1, Baosheng Rd., Yonghe Dist., New Taipei City, Taiwan
Phone: (02) 22316389
E-mail: client@3dmart.com.tw
Website: https://3dmart.com.tw/