購物商城 / SHOPPING MALL

    • 商品已加入購物車

Ultimaker - Original+ Kit
型號 UL0011
品牌 Ultimaker
售價 11300

數量

Ultimaker - Original3D打印機 + Kit

這是Ultimaker3D打印機系列之一 Original的升級版Ultimaker3D打印機使用開源(open-source)模式提供您無限的自由,讓您可以隨意修改他的核心內容。選購這組DIY套件,您將用有最可靠,精準且時下流行的3D打印機。自行將其拼裝起來,您對於每個部件的組合都會有更深的了解,可以隨心所欲的將他改裝成您想要的狀態,這也使得維修、升級和保養都變得非常簡單呢。

Make Magazine雜誌評論Ultimaker Original為最快,最精確的3D打印機。

經過開源的發展,這台眾望所歸也是為民而生的打印機更加的智能、直觀,先進的軟體讓3D打印變得輕而易舉。 Ultimaker也是cura這款最流行的免費切片軟體的創造者。

打印頭的部分十分輕巧,可以在無與倫比的速度下進行3D打印,而且不會影響他僅有20微米的精細程度。靈巧的加熱板,不僅可以防止您的模型翹曲,也非常穩定 ,讓您不用擔心。

由於其驚人的打印品質和速度,Ultimaker Original+3D打印機對於製造者來說是完美的新興能量。無論物件多麼複雜,他都能忠實地重現在您眼前。
Ultimaker Original+3D打印機除了DIY套件外,還加贈一個免費的UltiController!UltiController讓您直接觀察速度增減對列印品的影響,找到列印的最佳配置!

This is an upgraded version of the Ultimaker Origin 3D Printers. Ultimaker3D printers use open-source mode to provide you with unlimited freedom, so you can freely modify its core content. By purchasing this set of DIY kits, you will have the most reliable, accurate and popular 3D printer. You can assemble it yourself, you will have a deeper understanding of the composition of each component, you can arbitrarily modified it to your desired form, which also makes maintenance, upgrades and maintenance are very simple.

Make Magazine commented Ultimaker Original+ is the fastest and most accurate 3D printer.

After the development of open source, Origin become much more intelligent and intuitive. In addition, its advanced software makes Origin become more simply. Ultimaker is also the creator of cura, the most popular free firmware.

The print head is light enough to print at unbeatable speed and does not affect its detail of just 20 microns. Smart heating plate, not only can prevent your model from warping, but also very stable, so that you don’t have to worry about it.

Due to its amazing print quality and speed, the Ultimaker Original + 3D printer is the perfect emerging energy for manufacturers. No matter how complex the object is, it can faithfully print model in front of you.

Ultimaker Original + 3D printer have a DIY suite, and a free UltiController! UltiController allows you to directly observe that how do speed influence the quality of 3D printing, and find out the best print configuration!















優點:

Make Magazine雜誌評其為最準確,最快速的3D打印機
維護的成本低,且方便攜帶、經濟實惠
列印速度快且成像精細
列印體積大

Advantage
● Make Magazine commented Original + as the most accurate, fastest 3D printer
● The cost of maintenance is low, and easy to carry, portable
● Nozzle build speed is fast and print elaborate models
● Large build volume


Ultimaker Original 和 Original+ 3D打印機的差異
Ultimaker Original有兩個不同版本 : 其中一個是Ultimaker Original, 另一個則是 Ultimaker Original+.。他們之間非常相似,Ultimaker Original是較簡單的版本,而Ultimaker Original+ 為其升級版,擁有一些額外的功能像:
1. 加熱板讓物件固定在平台上方便列印
2. 改善了Z軸的穩定度
3. 更新更可靠的電子溫控系統
4. 更新的風扇確保安全
5. 根據CE認證所製造

Difference between Ultimaker Original and Original+
Ultimaker Original has two different versions: one is Ultimaker Original, and the other is Ultimaker Original +. They are very similar, Ultimaker Original is a relatively simple version, and Ultimaker Original + is Original’s upgraded version. It has some additional features, for example:
1.The heated plate allows the model to be fasten on the platform
2.Improve the Z-axis stability
3.Update more reliable electronic temperature control system
4.Updated fan to ensure safety
5. Manufactured according to CE identification


Ultimaker Original+組合包內有:
1.所有的Ultimaker Original+組件
2.UltiController 和 SD card
3.電源及電線
4.USB線
5.Ultimaker Original+用戶手冊
6.0.75 kg線材
7.膠棒
8.潤滑油
9.六角板手


Ultimaker Original + include:
1. Every part to assemble an Ultimaker Original+
2.UltiController and SD card
3. Power supply and cable
4.USB cable
5.
Ultimaker Original+ manual
6.0.75 kg filaments
7.Glue stick
8.Magnalube grease (for Z axle)
9.Hex wrenches (3x)


組裝時請使用Ultimaker Original Plus組裝手冊


您也可以先來看看Ultimaker Original+的介紹影片唷!






Ultimaker 香港總代理:




Ultimaker Warranty

列印體積:210 x 210 x 205 mm
列印平台:有加熱板 (到100°C)
支援線材:PLA/ABS
最高列印速度:300 mm/s
最小列印層厚:20 micron
噴頭配置:單噴頭
噴頭最高溫度:260 °C
噴頭尺寸:0,4 mm
耗材直徑:2,85 mm
傳輸方式:SD card / USB cord
定位精度:X/Y: 12,5 micron; Z: 5 micron
軟體:Cura, Slic3r, Repetier, Simplify3D, KISSlicer...
檔案類型:STL / GCODE
AC 輸入: 100 – 240 V, 50 – 60 HZ, 221 Watt max.
外型尺寸:357 x 342 x 388 mm


Build volume:210 x 210 x 205 mm
Build plate:有加熱板 (到100°C)
Supported materials:PLA/ABS

Highest print head travel speed:300 mm/s
Minimum layer resolution:20 micron
Print head:Single nozzle
Nozzle highest temperature:260 °C
Nozzle diameter:0,4 mm
Filament diameter:2,85 mm
Connectivity:SD card / USB cord
XYZ accuracy:X/Y: 12,5 micron; Z: 5 micron
Software:Cura, Slic3r, Repetier, Simplify3D, KISSlicer...
Filt type:STL / GCODE
AC input: 100 – 240 V, 50 – 60 HZ, 221 Watt max.
Dimensions:357 x 342 x 388 mm

side2_mod_top side2_mod_bottom
Back to Top